OPTIONS LIST FOR CENTROID CNC CONTROLS

MPG HAND WHEEL: Manual Pulse Generator. Using this handheld positioning device will allow you get up close to the work piece without streaching to reach the panel jog buttons. Each axis can be moved in steps as small as .0001 per pulse (detent). Housed a rugged case with an axis selector and cable.
MULTIPLE WORK COORDINATES: [G55 - 59] This allows you to establish a new home position for multiple vise locations; or other reasons. Move a single axis or all three.
SUBPROGRAMS & MACROS: Call your own pre-written routines during the exicution of another program. Macros can call other macros.
SCALING AND MIRRORING: You choose the center point for scaling the tool path larger or smaller. Change a 3D cavity; into a positive model.
UNLIMITED PROGRAM SIZE: The standard configuration comes with a generous 640Kb of program memory. If you plan; to generate tool path from CAD/CAM, point to point files, or digitized files this option will be very useful.
CENTROID ENGRAVING SOFTWARE: Millwrite engraving comes with many fonts and logos. Use this program to add your company name or logo to your parts. Rotate, mirror, scale, position, with a few key strokes. Easily generate rules or dial graphics. A valuable tool for your machine.
TOUCH PROBE DIGITIZING: These well thought out probing routines will locate part geomitry, display dimensions, even setup part home in seconds. The digitizer will feel its way around your model to provide instant tool path or you can export the information to your CAD/CAM for modification. New technology allows us to sell this option for less than ever before.
TOOL HEIGHT TOUCH OFF: Install the precise tool length directly into your tools library. A real time saver.
ROTARY TABLE (4th AXIS): Several sizes and accessories are available. Sold preassembled with motor, encoder, and cables.; Available on M-39 and M-400 only.
PROBING CYCLES: Probing cycles will automatically find the corner of a work piece or vise, the center of a circle, web, boss, or cavity among ither duties. Can be used to check part geomitry as a (limited) CMM tool.
DIGITIZING CYCLES: Centroid's touch probe will feel its way around your model to produce a "ready to use" G-code program. Just remove the probe, install the cutter and begin milling a duplicate of the original. If your part requires changes you can easily export the geomitry file to your CAD/CAM system.
Other options include: programable spindle speed, programable ridged tapping cycles, tool changer cycles, larger motors and drivers to fit your application.

	Put us to work for you